Puffed Corn Wheat Snacks Extruder-manufacture,factory,supplier from China

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

Advantages of Twin Screw Square Barrel ExtruderTwin-screw square barrel extruders are mainly used to produce various snacks and foods. Including puffed snacks, fried snacks, artificial rice, macaroni, etc.

Wheat Bran Puffing Snack Making MachineWheat bran, a by-product of wheat flour processing, is yellow, flaky or powdery. There is part of the germ (that is, the part where the wheat sprouts) at the end of the wheat hull, accounting for about 5-10% of the total wheat hull. About 1/3-1/2 of the wheat hull has gone into the flour. The total wheat hull is Divided into 6 layers, the outer 5 layers contain more crude fiber, less nutrients, and are difficult to digest. Wheat hulls contain large amounts of B vitamins.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

How to Calculate the Protein Content in Feed and the Function of Protein in FeedHow to calculate the protein content in 100 kg feed1. Calculate the protein content in 100kg feed. Firstly, check the nutritional value table of feed to obtain the content of raw protein in feed.2. Take feed formula as an example: Of the corn and soybean meal types, 65 are corn, 10 are wheat bran, and 18 are soybean meal. The protein content of corn is 8%, the protein content of wheat bran is 14.3%, and the protein content of soybean meal is 43%.

Principles and Advantages of Puffed FoodPuffed food, also known as extruded food, exploding food, light food, etc., is a new type of food developed internationally in recent years. It uses grains, beans, potatoes, vegetables, etc. as raw materials, and is processed by puffing equipment to produce a wide variety of food with exquisite appearance, rich nutrition, crispy and delicious food. Therefore, a large category of food has been formed uniquely.

Advantages of Puffed Floating Fish Feed1. Easy feeding and management to reduce diseasesExtruded aquatic feed can be suspended on the water surface for a long time. There is no need to set up a special feeding platform when feeding, just feeding at a fixed point. Fish need to float on the water surface when feeding, so they can directly observe the feeding situation of the fish, adjust the feeding amount in time, and understand the growth and health status of the fish in a timely manner.

How to Improve the Puffing Degree of Corn Puff SnackIn the production process of puffed food, uneven product discharging and spraying often occur, which affects the degree and effect of puffing. Today we will share with you some troubleshooting methods.1 Control of Puff Twin-Screw ExtruderDifferent puffing extruder machine equipment vary in the degree of puffing. Generally speaking, puffing equipment can control the time, temperature and pressure of raw materials under heating and pressurization conditions, thereby affecting the puffing degree of raw materials.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.